belt grinder

Replies to This Discussion

Permalink Reply by Daniel Howland on February 25, 2010 at 21:26

• ▶ Reply

Permalink Reply by Daniel Howland on February 25, 2010 at 21:28

Slack grind, (no platen)

• ▶ Reply

Permalink Reply by Daniel Howland on February 25, 2010 at 21:29

1/2 inch wheel

• ▶ Reply

Permalink Reply by Victor B. Brewer on February 26, 2010 at 6:25

Thanks for the other pics Daniel. Have a good weekend. Vic

• ▶ Reply

Permalink Reply by CaptJeff Saylor on February 26, 2010 at 13:04

Vic i found a great YouTube video deminstrating different belt sanders used to make a knife. thought you might like to see it!

• ▶ Reply

Permalink Reply by Kenneth Spinuzzi on March 8, 2010 at 11:44

Hey Daniel Very nice set-up are you selling the plans for this or ? Please let me know I am very interested in making this for my self - I currently am using 1" x 42" delta and 3--4" x 36" Craftsman this would cover all my needs Please let me know Thanks Ken Spinuzzi

• ▶ Reply

Permalink Reply by Daniel Howland on March 8, 2010 at 17:36

Kenneth,

Thanks for your kind words, I'm glad you like my grinder! I do not have plans, I just made it as I went along out of my head. I modeled it after Beaumonts KMG grinder, just by looking at the pictures from their website: http://www.beaumontmetalworks.com/ I was able to fabricate my own. I bought the tapered drive and tracking wheels from USA knife makers supply: http://www.usaknifemaker.com/store/power-drive-wheel-4-with-58-bore... I bought my 10 and 8 inch rubber surfaced wheels from sunray: http://www.sunray-inc.com/ they work great and are a faction of the cost, these people are great to work with and back their product. USA knife makers supply has plans on their site for a no weld grinder: http://www.usaknifemaker.com/store/plans-for-the-no-weld-grinder-sa... you can get most of your grinder parts from these folks.

• ▶ Reply

▶ Reply to Discussion

• ‹ Previous
• 1
• 2
• Next ›
• Page