Welcome Home....******......This week Wed night Chat is PUMA Knives join us at 9PM EDT
Join/Renew NKCA....19.95 Membership pricing during the membership drive

 

I am currently looking at a knife described on ebay as CASE XX 9208 SS 2-DOT 2008.  Does this mean that the knife was only made in 2008 or is it simply the first year of manufacture?  I do notice knives that are said to be new but have dates as far back as 1998. Again only made in 1998 or 1st year of manufacture? Case fans input to answer this question will be appreciated.?

Views: 140

Replies to This Discussion

Jay,

It is simply a date code. The knife was made in 2008 but it doesn't mean that is the first year of production. Beginning in 1970 Case started using  dots and/or X's to depict the year of manufacture. They start each decade with 10 dots and/or X's and they remove one for each year thereafter.

For example, a 2000 model would have 5 dots and five X's. A 2008 model has 8 characters removed which depicts 2008.

Case uses a series of dots to denote the year of manufacture.  It means the knife was made in THAT year’s run.  The same exact pattern may appear with a different number of dots but then it was be from a different year.

They began using the dot system in 1970.  Depending on the decade, the dots will look different,  They may be dots, X’s, a series of dots and X’s.  Regardless of the symbol used it is called a dot.

From: A pocket guide to knives (Lexicon, D)

 

Dots: Modern era Case knives use a dot numbering system to signify the year a knife was made. The dots normally appear as part of the knife's tang stamp. 10 dots signify a year ending in zero. With each passing year a dot is removed So for the decade beginning in 2000:

  • 2000 =10 dot
  • 2001= 9 dot
  • 2002 =8 dot
  • 2003= 7 dot
  • 2004 = 6dot
  • 2005= 5 dot
  • 2006 =4 dot
  • 2007= 3 dot
  • 2008 =2 dot
  • 2009= 1 dot

Case knives are all dated by the unique tang stamps they have....http://www.wrcase.com/case_college/tang_stamps/   ......this might help you out

As mentioned the same knife in the same pattern and scale material could be made in other years but then the tang stamp would have a different number of dots

Hi, 

Yes, this knife WAS MADE in 2008. It should be a HALF-WHITTLER (2 blades) with imitation mother-of-pearl handles (9 : imitation mother-of-pearl; 2 : number of blades; 8 : whittler).

http://www.allaboutpocketknives.com/wr_case/about_case_knives/case_...

Jean that is a Stag 3 blade stockman in the 18 pattern. 5=Stag 3 number of blades 18 is pattern number.

That's exact, Gerald : this one (on the picture, just as an example of the system) is a 5318 stockman. Jay's knife number is 9208 ;=)

Keep the edge!

Gerald Hines said:

Jean that is a Stag 3 blade stockman in the 18 pattern. 5=Stag 3 number of blades 18 is pattern number.

Thanks guy's that's gonna help everyone.

The "9" could also be corolon and in 2008 probably is.

Sorry Jean I miss understood.

Corelon? Yes, you probably are right. Don't de sorry, my friend.

Gerald Hines said:

The "9" could also be corolon and in 2008 probably is.

Sorry Jean I miss understood.

RSS

Ask about Queen Classic Line

BE SURE TO STOP AND SEE US AT THE BLADE SHOW @ 28S

TSA KNIVES, LLC

You iKC Partners

Your iKC Partners

 Jan Carter                     Owner

 Steve "Hog" Hanner     Manager  

J J Smith                      Moderator

Ron Cooper                  Moderator

Ron Dumeah                 Moderator     

© 2013   Created by Jan Carter.

Badges  |  Report an Issue  |  Terms of Service