iKnife Collector
The online community of knife collectors, A Knife Family Forged in Steel
whats the best way to achieve a good and symmetrical primary grind?
whats the best way to achieve a good and symmetrical primary grind? i have several tools at my disposal (bench grinder, sanders, hand held grinders, chop saw) and a friend with an old school milling machine... is there a way to get a good symmetrical primary grind by use of jig or guide? or is there a tool or adapter i can buy to make this task easier? or tips or tricks?
I asked this in KNIFE MAKING BEGINNERS too
Replies to This Discussion
-
KnifeMakerPermalink Reply by Guillaume Cote on -
I paint the blank with steel blue and mark a line with calipers ...this will be the top of my grind it gives me a good visual.
-
-
2021 CalendarPermalink Reply by Randy, HHH Knives on -
When you say primary grind do you mean the bevel or the cutting edge?
I set my grinds with a belt sander. I scribe the center of the edge so I stay true and straight and then mark the blade with a scribe or marker as a visual aid.. Then using a 50 Grit ceramic belt I do 90% of the grind. then work through the grits and refine them.. I do my grinds free hand. But I have seen many jigs that will help get very repeatable results. You can make a jig or buy a grinding jig. Like the bubble jig. etc. Hope this helps a bit.
-
whiteriverknives.com
Latest Activity
"Just found where to send a friend request. So you will be getting it 10 years late"
"What is the best way to store your knife if your don't have the original box and the paper it usually comes in?"
© 2026 Created by Jan Carter.
Powered by
